⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Thermometers
Thermal mounting sleeve

application

  与两节式热电偶(阻)和双金属温度计配套使用,保护热电偶(阻)和双金属温度计正常工作。 The thermal installation sleeve is used with two-section thermocouple (resistance) and bimetal thermometer to protect the normal operation of the thermocouple (resistance) and bimetal thermometer. 且可用于高压高流速场合。 It is heat-installed and can be used in high pressure and high flow rate applications. zzyfwh.com

Features of Thermal Mounting Sleeves

★ All refer to IEC international standard design

★ Blind hole processing, high pressure resistance

★ Simultaneous manufacturing and installation with equipment

★ Different pressure levels can meet different needs

主要技术参数 Main technical parameters of thermal installation sleeve

★ Nominal pressure

Generally refers to the static external pressure that the protective tube can withstand without breaking at normal temperature. The allowable working pressure is not only related to the material, diameter, and wall thickness of the protective tube, but also to its structure, installation method, and flow rate and type of the measured medium.

★ Hydrostatic test

When it is required to check the pressure resistance and leakage of the protective tube, the protective tube must be tested. The test pressure is 1.5 times the pressure rating of the protective tube.

线探伤试验 ★ X-ray flaw detection test

When there is a requirement for the inspection of the wall thickness, eccentricity of the protective tube, etc., the inspection shall be carried out according to user requirements.