⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Digital display instrument
Intelligent Flash Alarm

● Scope of application

DX-700 intelligent flash alarm device is used with various control and detection instruments with voltage switch or non-voltage contact switch. When the parameters in the production process exceed the limit value, the intelligent flash alarm device emits sound and light alarm signals and outputs alarm contacts. To draw the operator's attention and take measures.

● Features

Eight input signals, corresponding to eight high-brightness digital tubes or light-emitting modules to display the current status of each channel. The test function is activated by an external contact switch or a panel button. The mute function is controlled by an external contact switch or a panel button.

● Main technical indicators

Input signal: no voltage switch contact or voltage signal, voltage input allowable range is 4-24VDC
Display mode: Eight 0.8-inch high-brightness digital tubes or light-emitting modules respectively display the current status of each channel. Alarm output: 1 relay alarm output, the contact capacity is AC220V / 3A.
Communication output: interface mode-isolated serial two-way communication interface RS485 / RS422 / RS232 / Modem
Baud rate--300 ~ 9600bps internal freely set power: switching power supply 85 ~ 265VAC power consumption below 4W

Four: key functions

SET--Reset key

▲ --- Test key

 --- Alarm output clear key

CLR --- silence key

Five: Instrument outline drawing

Dimensions: width x height x depth
160 × 80 × 125mm
Opening size: 152 + 0. 7 × 76 + 0. 7


● Terminal wiring diagram

Non-voltage switch contact input Voltage signal input