⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Digital display instrument
XTRM remote transmission monitor

采用先进的微处理器进行智能控制,适用于温度、湿度、压力、液位、瞬时流量、速度等多种物理量检测信号的显示控制,可巡回检测多路测量信号。 1. XTRM remote transmission monitor adopts advanced microprocessor for intelligent control. It is suitable for the display and control of various physical quantity detection signals such as temperature, humidity, pressure, liquid level, instantaneous flow rate, and speed. And can perform a high-precision linear correction on a variety of non-linear input signals. Intelligent digital control, the range can be set freely. There are two types of control output: each cycle alarm output / remote transmission output; the highest measurement point after multiple comparisons is used as the output (remote transmission output). The input / output circuits are optically isolated and have good anti-interference ability. With high-brightness LED digital display, pointer meter display. The whole machine adopts a wall-mounted structure (length × width × height = 160 × 110 × 70mm), which is very easy to install.

This product can measure 2 to 4 measurement points at the same time, and after comparing the temperature in each temperature measurement circuit, take one point of the highest temperature as the output, and you can watch the temperature of each point one by one at the scene by pressing the button.

主要技术性能: Main technical performance of XTRM remote transmission monitor :

input signal

4路巡回测量 Measurement channels 1 to 4
SKEJTWRe等 Analog thermocouple: standard thermocouple -B , S , K , E , J , T , WRe, etc.
Cu50Cu100 、远传压力电阻-- 30350Ω等 Resistance: Standard thermal resistance -Pt100 , Cu50 , Cu100 , remote pressure resistance -30 to 350Ω, etc.
10mA420mA等(输入电阻≤250Ω ) Current: 0 to 10mA , 4 to 20mA, etc. (input resistance ≤250Ω )
5V15VmV等(输入阻抗≥250KΩ ) Voltage: 0 to 5V , 1 to 5V , mV, etc. (input impedance ≥250KΩ )

output signal

20mA (负载电阻≤500Ω) DC 010mA (负载电阻≤750Ω) Analog output DC 4 to 20mA ( load resistance ≤500Ω) DC 0 to 10mA ( load resistance ≤750Ω)
5V (输出电阻≤250Ω)DC 15V (输出电阻≤250Ω) DC 0 to 5V ( output resistance ≤250Ω) DC 1 to 5V ( output resistance ≤250Ω)

characteristic

字或±0.5%FSMeasurement accuracy: ± 0.2% FS word or ± 0.5% FS ;
Resolution digital display : ± 1 character
9999; (或特殊要求) Digital display of display range : -19999999; (or special requirements)
英寸高亮度LED双数码显示发光二极管工作状态显示14测量通道号显示 Display mode 0.8 -inch high-brightness LED dual digital display LED working status display 1 to 4 measurement channel number display
Channel shield and lock function display
50 ℃温度自动补偿 Temperature compensation 050 ℃ Automatic temperature compensation
Parameter setting panel Touch button Digital setting Parameter setting value Permanently save parameter setting value after power off Password lock
Protection mode Power supply auto reset

Use environment

℃~ 80 ℃ Ambient temperature -25 ℃ ~ 80
避免强腐蚀气体 Relative humidity ≤90% RH Avoid strong corrosive gas
50Hz±2Hz ,线性电源) Supply voltage conventional type : AC 220V% ( 50Hz ± 2Hz , linear power supply)
265V (开关电源) ·DC 24V±2V Special type · AC 90265V (switching power supply) · DC 24V ± 2V

产品选型 Selection of XTRM remote transmission monitor

XTRM- () 2 () / G

Number of channels

2

个 Number of channels is 2  

3

个 Number of channels is 3  

4

个 Number of channels is 4  

Enter model

2

Thermal resistance : Pt100

temperature range

10

100℃ 0 to 100 ℃

15

150℃ 0 to 150 ° C

Output form

G

20mA 4 to 20mA

power supply

D

(可省略) DC24V (can be omitted)