⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Wire and Cable
Single-phase constant power electric heating cable

I. Product structure and working principle The power bus is two parallel insulated copper wires. The heating wire is wound on the inner insulation layer, and the heating wire is connected to the bus at a certain distance (ie, "heating section length") to form a continuous parallel resistance . After the bus is energized, each parallel resistor heats up, thus forming a continuous heating cable.
The single-phase constant power heating cable is mainly used for antifreeze and heat preservation of pipes and meters everywhere, with a maximum maintenance temperature of 150 ° C. It can be used in explosive gas applications in the first and second zones of the factory.
Product specifications and main technical characteristics

Maximum fluid maintenance temperature: refers to the maximum process temperature that the medium in the pipeline needs to maintain. Generally, it should not exceed the value specified in this table. Rated voltage: 220V. Maximum temperature resistance: 250 ° C.
Normal insulation resistance: ≥20 megaohm Protection level: IP54
Dielectric strength: 2000V 50Hz / 1min Explosion-proof certificate number: CJE × 07.125U
Insulation material: F46 fluorine plastic Size (including textile and outer sheath): 6.3 × 9.5mm