⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
technical article
Problems and solutions in pressure gauge calibration
2011-6-7 14:24:02

Problems in the pressure gauge calibration process:

1. The connected standard instruments and calibrated instruments should be free of oily and corrosive substances and other impurities, otherwise it will affect the normal operation of the instrument.
2. When removing the pressure gauge, the system must be at zero pressure.
3. When changing vacuum or pressure, the system must be at zero pressure.

Common faults and solutions:
1, can not hit the pressure, hand pressure pump feels air pressure
Reasons: 1) The reversing valve is not reversing, causing air leakage.
2) The positive pressure check valve or negative pressure check valve does not reset after moving, resulting in air pressure.
Treatment method: The directional valve must be switched in place.

2.The pressure regulating pump cannot be pressurized
Solution: Check whether the sealing ring in the pressure regulating pump is damaged.

3.No pressure or no pressure output on one side
Solution: Check whether the output port is blocked.

4.The negative pressure does not reach the standard
Solution: The instrument should be judged according to the actual atmospheric pressure in the local area.