可直接用来观察各种容器内介质的液位高度。 The magnetic flap liquid level gauge can be used to directly observe the liquid level height of various media in the container. It is suitable for liquid level indication in petroleum, chemical and other industrial fields. The structure of the liquid level gauge is simple,
Observation is intuitive and clear, no blocking, no leakage, easy installation and simple maintenance.
The upper and lower mounting flanges of the magnetic flap liquid level gauge are connected to the container to form a connector. The actual height of the liquid level in the container can be directly observed through the glass plate. The upper and lower valves are equipped with safety steel balls,
When the glass is damaged by accident, the steel ball is automatically sealed under the pressure of the container to prevent the liquid in the container from overflowing and ensure the safety of the operator
The level gauge has a reliable and safe detection instrument. Due to the magnetically-isolated and sealed structure.
具有就地显示的真读式特性。 The magnetic flap level gauge has a true-reading characteristic of local display. No need for multiple sets of level gauges. Has a single unit for full range measurement
the amount. The device has fewer holes, clear display, conspicuous signs, and intuitive reading. Save when the level gauge is directly equipped with a display
The middle of the signal detection of the system becomes loose, thereby improving its transmission accuracy
Working principle of flap level gauge
1. Simple structure, easy installation and easy maintenance
2.Suitable for liquid media with large viscosity
3.The viewing direction of the display can be changed at will
4. When the container is not suitable for side openings and there is little space around the container, a liquid level gauge of this form can be installed on the upper and lower parts of the container.
的安装，建议安装时要慎重保持垂直，这样就能保证内里的浮球主见在管内可以自由的运动自如。 For the installation of the magnetic flap level gauge , it is recommended to keep it vertical carefully during installation, so that the floating ball inside can be freely moved in the tube.
At the same time, it is also necessary to pay attention that the surrounding of the body of the level gauge does not have the opening of the magnetic guide, which will affect the magnetic
For the correct operation of the flap level gauge, after the installation is complete, the steel column must be guided and calibrated. Recommended for future use
It is also necessary to periodically clean them in the main tube such as impurities or pimple.