⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
technical article
Metal tube float flowmeter is an indispensable instrument in industrial society
2012-3-5 11:15:46



采用了国际先进的Honeywell无接触检测磁场角度变化的磁测传感器、并配以Motorola微处理系统,可实现液晶指示、累积、远传输出(4-20Ma)、脉冲输出、上下限报警输出等功能,该型智能信号变送器具有及高的精度和可靠性,完全可以取代进口同类型仪表,且具有性价比高、多参数标定、掉电保护等到特点。 The metal tube float flow meter uses the international advanced Honeywell non-contact magnetic field sensor to detect the change of the magnetic field angle, and is equipped with a Motorola micro-processing system. Lower limit alarm output and other functions, this type of intelligent signal transmitter has high accuracy and reliability, can completely replace imported instruments of the same type, and has cost-effective, multi-parameter calibration, power failure protection and other features. Metal tube float flowmeter is an indispensable instrument in the industrial society. He represents our advanced industrial space and advanced society. To better understand the metal float flowmeter requires more time to invest in research Of course, it is convenient and thorough to understand its use, usage methods, etc. We need to invest in the corresponding factories to learn and practice. I hope that in the future we will have a more comprehensive understanding of the advanced equipment of the society.

技术要求 Technical requirements for metal tube float flowmeter
1. Measuring range: water (2.5 ~ 6000) L / h; air (0.07 ~ 2000) m3 / h (at 0.101025 MPa, 20 ℃).
2. Accuracy level: 1.5, 2.5.
3. Range ratio: 10: 1.
4. Working pressure: DN15 ~ 50, 4 MPa; DN80 ~ 100, 1.6MPa.
5. Medium temperature: -80 ℃ ~ 200 ℃ (lined with F46 flowmeter 0 ℃ ~ 85 ℃).
6. Viscosity of liquid medium: DN15 <5mPa? S; DN25 ~ 100 <5mPa? S.
7. Connection method: flange connection, thread connection, etc .; flange adopts GB / T9119.8 ~ 10 standard.
8. Total length: DN15 ~ 100 250mm.
9. Material of measuring tube: ordinary type 1Cr18Ni9Ti, corrosion-resistant type Cr18Ni12Mo2Ti, 316L, 316 lined F46, etc.
If the user has special requirements, special orders can be made.
10. Output signal: two-wire system (4-20) mA, three-wire system (0-10) mA.
11. Linearity: 1%;
12. Power supply: DC 24 (1 ±) V.
13. Power consumption: 25 mW.
14. Ambient temperature: -25 ℃ ~ 55 ℃.
15. Temperature effect: 0.5% / 10 ℃.
16. Load resistance: DC (0 ~ 10) mA (0 ~ 1) kΩ;
(4 to 20) mA (0 to 600) Ω.
17. Wiring cable: RVVP 3 × 28 / 0.15.
18. Explosion-proof grade: ExibⅡ2CT5 (certificate number GYB03582U).
19. With safety barrier model: LB906 type.
20. Electric remote transmitter: K5WI-I or ESK-I (two-wire system). ;

质量最好,体积小,检测范围大,使用方便。 The metal tube float flowmeter has the best quality, small size, large detection range and easy use. Can be used to measure the flow of liquid, gas and steam, especially suitable for low flow rate and small flow medium flow measurement. With its superior quality and good after-sales service, Dongxiang Instrument Enterprise plays an important role in the domestic industry. When people refer to metal tube float flow meters, people always think of Dongxiang Instrument first.

彩票注册 七乐彩 欢乐拼三张 欢乐拼三张