As one of the main power sources in the industry, accurate measurement of steam is a necessary measure. However, many current maintenance personnel at the site always gave a general description of the purchase of steam flowmeters when purchasing, which made the manufacturers confused. Today I will elaborate on the measurement of on-site steam flow meters.
In the industry, the steam is often accompanied by changes in temperature and pressure during the transmission process. Therefore, in order to ensure the quality of the steam outlet and the end user, the necessary measures must be taken to measure it.
For small-caliber steam measurement (under the premise that the temperature and pressure are not very high), sometimes on-site vortex flowmeters will be used for measurement, but the same response will also be received from customers. The on-site measurement is not accurate and the error is too large. . This main vortex flowmeter's sensitivity adjustment, or because the probe is stuck due to the measurement medium, can not be measured, the field empty pipe flow will also be accompanied by the phenomenon of empty pipe beating.
In our company's view, the company is based on the principle of thinking for customers. In principle, it will never actively recommend customers to use vortex flowmeters. Instead, it is recommended to use the company's main differential pressure flowmeter. The differential pressure flowmeter is particularly suitable. For steam measurement at high temperature and pressure (for the selection of steam table, please contact the company's technical department: 0517-86900901). In the past, a standard throttling device was often used, but recently it has responded to a large pressure loss in the field. Therefore, in recent years, the company has actively studied and continuously referenced foreign advanced measurement technologies. It has successively developed V-cone flowmeters , balanced orifice flowmeters, etc. No matter in terms of pressure loss or range, they all make up for the shortcomings of the early standard throttling device and fundamentally solve the problem of on-site steam metering.
For high-temperature and high-pressure steam metering, nozzle flowmeters are usually used for measurement, and the connection method is welded. This is the company's many years of production experience, and it is worth everyone to learn from and learn from. If you have any questions, you can contact the company: 0517-86900920. Based on the principle of thinking for users, the company will choose the flowmeter that suits your own process according to the process on site
Product introduction: zzyfwh.com