中国仪器仪表行业协会名誉理事长奚家成接受采访表示：“十二五”的启动无疑将有力地推动仪器仪表行业的发展。 Guide: The Honorary Chairman of China Instrument Industry Association, Jiajia Cheng, said in an interview that the launch of the "Twelfth Five-Year Plan" will undoubtedly effectively promote the development of the instrument industry. The outline of the "intelligent manufacturing equipment innovation and development project" included in the high-end equipment manufacturing has been drafted. Among them, there are many instrumentation and instrumentation control projects, and the determination and start-up of these projects are good for the entire industry. Regarding the overall trend of the instrumentation industry in 2011, Jia Jiacheng's attitude was "cautiously optimistic"
"The industry's production and sales value will reach or approach 1 trillion yuan during the 'Twelfth Five-Year Plan' period, with an average annual growth rate of 15%." Ji Jiacheng, Honorary Chairman of the China Instrument Industry Association, told a reporter recently.
When looking at the next trend of the industry, he said that the uncertain factors in 2011 increased, and this year it is impossible to have the same high growth rate as last year.
The increase in production and sales will reach 12% to 15% this year
"A preliminary estimate is that this year's instrumentation industry's production and sales growth will reach 12% to 15%, profit growth will reach about 15%, and the increase in imports will also be significantly greater than the increase in exports." Jiajia Cheng told reporters.
It is reported that the growth rate of production and sales of the instrumentation industry entered a historically high level last year. Among them, the annual production and sales exceeded 500 billion yuan for the first time, and the profit growth reached 46.65%.
"The base is already very high, and this year's growth rate is unlikely to be any longer." In predicting and analyzing the industry trend this year, Jia Jiacheng believed that the industry will change from restoring growth to restoring growth. "Although there is little A word, but very different, "-the former benefited from the recovery of normal demand stagnated by the financial crisis, while the latter is based on the growth of the new economy." Since the second half of last year, It's fully entered into recovery growth. "
"There are many uncertainties this year," said Jiacheng Cheng. These include macroeconomic trends, fiscal and monetary policies, inflation and costs, the dilution of "crisis response" measures and the transfer of policy measures; And implementation of policies such as “high” and real estate, as well as foreign exchange reform and foreign exchange policies, trade frictions, and international markets.
However, the launch of the "Twelfth Five-Year Plan" will undoubtedly strongly promote the development of the instrumentation industry. For example, he said that the outline of the "intelligent manufacturing equipment innovation and development project" included in the high-end equipment manufacturing has been drafted. Among them, there are many instrumentation and instrumentation control projects, and the determination and start-up of these projects are for the entire industry. Good.
"In addition, as far as I know, there are many innovative development projects in the revitalization of emerging industries, such as marine engineering, new energy engineering, etc. The planning of related fields will also drive the growth and increase in demand for instrumentation and control equipment." He Tell the reporter.
Therefore, with regard to the overall trend of the instrumentation industry in 2011, Jia Jiacheng's attitude is "cautiously optimistic"-the increase in production and sales profits will be significantly lower than last year due to macroeconomic changes, and the increase will be higher and lower than before; the increase in profits has been higher than the output and sales. The increase is high, and it is estimated that this year will return to the normal state. "It is important to note that the gap between enterprises will be significantly widened."
"Twelfth Five-Year Plan" annual average growth rate of 15%
So what are the guiding principles for the development of the instrumentation industry during the "Twelfth Five-Year Plan" period?
"In response to the needs of high-end manufacturing, emerging industries, and major national engineering needs, focus on the development of advanced automatic control systems, large-scale precision test equipment, new instruments and sensors, and establish an industrial system that includes precision manufacturing, lean management, and modern manufacturing services; The market share of the product supports the 10 billion yuan group and characteristic enterprises, and strives to establish the foundation of high-end intelligent equipment, the modern instrumentation and control industry. "Said Jiacheng Cheng.
He also gave a set of figures: the specific planning goal is that the industry's production and sales value will reach or approach 1 trillion yuan, with an average annual growth rate of 15%; the total profit will reach 71.3 billion yuan, with an average annual growth rate of 13%; the main operating profit margin Reached 8.5% ~ 9%, total assets reached 870 billion yuan; the industry's export value exceeded 30 billion US dollars, and the export growth rate was greater than the import growth rate. Among them, the export proportion of local enterprises will be greater than 50%. An inflection point will appear in the initial three-five-year deficit. "
By then, there will be 3 to 5 companies in the industry with production and sales exceeding 10 billion yuan, and over 1 billion enterprises will exceed 100, and their market concentration will reach 25%. At the same time, the number of listed companies will also reach 150. The production and sales value of local enterprises will account for more than 70% of the total industry value, and the market share of local enterprises will also be greater than 60%.
It is reported that there are currently 20 companies in the industry with production and sales exceeding 1 billion yuan, and the market share of local enterprises is 52.67%.
During the "Twelfth Five-Year Plan" period, the market share of mid- to high-end products in the industry will also increase significantly. Key backbone enterprises will popularize modern production management based on information technology, and the business capabilities of modern service industries will also be significantly improved.
"Whether we can seize the important opportunities of the" Twelfth Five-Year Plan "and achieve these goals depends on our ability to improve, adjust and adapt.
Technical bottlenecks are difficult to break
"The economic transformation during the" Twelfth Five-Year Plan "period is conducive to the rapid development of the instrumentation industry." Jia Jia became a reporter and analyzed the opportunities and difficulties of the industry development.
First of all, the status of the entire electromechanical manufacturing industry in the middle and late stages of industrialization will relatively rise, and the structural adjustment of the equipment manufacturing industry will also develop in the mid-to-high-end direction that is closely integrated with instrumentation and control. "Attaching importance to and highlighting the manufacture of high-end equipment will put the development of instrumentation and control technology on the agenda again", and energy conservation and emission reduction, green economy, independent innovation, and emerging industries will also effectively promote the increase in demand for instrumentation and control equipment and technological development .
Secondly, the "integration of the two industries" will also increase the demand for measurement and control equipment in the long run. "The" integration of the two industries "is an important policy and a necessary way for China's economy to become stronger and stronger. It is an industrialization with the characteristics of the times and an informatization with Chinese characteristics." Said Jiacheng Cheng, including research and development design, and production process control. , Enterprise management, marketing, human resource development, new business cultivation, enterprise technology transformation, etc., but its foundation and focus are on the informationization of the production process, which is divided into process industry informationization and discrete industry informationization. "This is related to the instrumentation industry closely related".
At the same time, economic globalization has also entered a new stage-the globalization of manufacturing has evolved from centralized to decentralized to moderately concentrated, and the globalization of the instrumentation and control industry has become more active, and its products have shifted from low-end to mid-to-high-end with large-scale demand. Development, the model has also changed from assembly-oriented joint ventures, sole proprietorships to commissioned production, from foreign parties to Chinese management.
But it's not all easy. In Jiajiacheng's opinion, the main difficulties in the development of the industry during the "Twelfth Five-Year Plan" period come from several aspects: the slow improvement of innovation capabilities and the source of technology are still the bottlenecks restricting the development of the industry; the size and quality of enterprises need to be improved; The impact is still serious.
In addition, in the interview, Jia Jiacheng also told reporters some of his strategic and tactical thinking on the development of the industry.
First, the instrumentation and control industry must pay attention to the formation and establishment of advantages of scale. "At present, the American industry represents the advantage of original development, the Japanese industry represents the advantage of manufacturing technology, and the advantage of China's industrialization lies in the large-scale manufacturing and operation on a certain technical background. Although the instrumentation industry is not a large-scale industry However, in order to gain a foothold in the world, we must follow the characteristics of China's industrial development and give play to the advantages of scale. If we only rely on technological advantages, we cannot succeed in a relatively short period of time. "
Secondly, we must step up our efforts to open up and develop in the globalization of the instrumentation and control industry. At the same time, we must take advantage of the strong east wind of economic restructuring, give play to the advantages of the industry, and accelerate development.
"Twelfth Five-Year Plan" instrumentation industry development focus and key technologies
I. Key Products
(1) Enhancement of Coriolis mass flowmeters required for process automation in the fields of 1,000 MW thermal power, 10 million tons / year of oil refining, 1 million tons / year of ethylene, intelligent monitoring of urban heating, centralized oil and gas transmission, etc. Multi-channel ultrasound, high-end electromagnetic flow meters and other high-end flow meters; radar level gauges and other high-end liquid level meters, regulators for harsh conditions, high-reliability online analysis instruments.
(2) The development of FA PLC, special control system, new sensors, typical equipment demonstration applications
(3) Improvement of 1E-level control system and 2E-level on-site instrumentation wind turbines and wind power plant control systems and sensors for rail transit control systems for nuclear power. Advanced smart grid advanced measurement system and smart meters. (4) Automatic environmental monitoring system and pollution source monitoring system Environmental testing equipment for portable, emergency use (5) Food and drug safety testing equipment, sample pretreatment technology and equipment (6) High-end dynamic testing machines, special environmental testing and deformation measurement testing equipment, spectrum analyzers, scanning electron microscopes, X-rays , High-end manufacturing and cutting-edge scientific scientific instruments and testing equipment such as non-destructive testing equipment such as industrial, CT, 3D ultrasound, etc.
(1) New sensor technology (2) Industrial wireless communication network technology (3) Functional safety technology (4) Precision machining and special process technology (5) Analytical instrument functional components and application technology (6) Intelligent technology (7) System integration And application technology