指示器：它安装在桶槽外侧或上面，用以指示和控制桶槽内的液位高度的一种控制仪表，指示器由磁性色片组成，当本体管内的磁性浮球随液位上升时色片翻转，即可显示液位高度。 Magnetic flap liquid level indicator: It is a control instrument installed on the outside or above the barrel tank to indicate and control the height of the liquid level in the tank. When the liquid level rises, the color film is flipped to display the liquid level height. It is also possible to install a magnetic switch or remote transmitter on the body tube to output a switch signal or an analog signal. It is suitable for high temperature, high pressure, corrosion resistance and other occasions. It can be displayed and controlled remotely. The body pipe is made of seamless steel pipe, and the connecting pipe is welded with pull holes, and there is no scratch inside. The installation method can be installed side or top, and the lower end of the body can be installed with a drain valve as required. Splice flanges can be customized.
1. Body tube: φ60.52, Material: SUS304 / 316L / PP 3. Upper and lower flange size: 1-1 / 2 ″ × 5 Kg / cm2 4. Liquid level transmitter, magnetic switch, scale optional Match
指示器特点： Third, the magnetic flap liquid level indicator features:
1. Use the liquid level measurement with the liquid medium in the container. In addition to on-site display, functions such as remote transmitters and level controllers can be equipped. 2. The display is intuitive and eye-catching, and the display direction can be changed according to user requirements. 3. The measuring range is large, not limited by the height of the container. 4. Because the display component is completely isolated from the measured, it has good sealing and is safe and reliable.
5. Reasonable structure, firm and reliable, easy installation, no special maintenance required. 6, strong corrosion resistance, explosion-proof.
和玻璃管液位计的区别:1、磁翻板液位计是在板管式液位计基础上按照国外最新技术发展起来的内浮子式液位计,由于其承压零件使用不锈钢材料,在结构上减少了密封结合面，故仪表的安全性、可靠性得到提高。 The difference between the magnetic flap level gauge and the glass tube level gauge: 1.The magnetic flap level gauge is an inner float level gauge developed on the basis of the plate and tube level gauge in accordance with the latest foreign technology. The stainless steel material is used for the pressure parts, and the sealing joint surface is reduced in the structure, so the safety and reliability of the instrument are improved. The liquid level display is clear and eye-catching. 2. The glass plate type liquid level gauge is the simplest direct-indicating level instrument that works under higher pressure. Its reliability and economy are incomparable with other instruments. As a basic liquid level indicator, it is the simplest liquid level indicator. Position measurement occasions and large automation projects with a high degree of automation are indispensable. The liquid passage formed by the glass plate and the main body of the liquid level gauge is connected to the container to be measured through a flange for connection or a tapered pipe thread to form a connector. The liquid level observed through the glass plate is the same as the liquid level in the container, that is, the liquid level .