Common sense of maintaining the instrument
以便维修查询。 1. It is necessary to make a record of the timing and phenomena of failures during the operation of the instrument , in order to facilitate maintenance and inquiry.
注意不要损坏仪器的外表,特别是探头、按钮及其连接电缆，严禁机械损坏,损坏后应该立即停止使用。 2. Be careful not to damage the appearance of the instrument , especially the probes, buttons, and their connecting cables. Mechanical damage is strictly prohibited. Stop using it immediately after damage. 养成良好习惯,在各种操作完成后再关电源。 Special attention should be paid not to turn off the machine arbitrarily during the work , develop good habits , and then turn off the power after various operations are completed.
每一次监护完成后,要用干布或者纸巾清洁探头。 4. After each monitoring is completed , clean the probe with a dry cloth or paper towel. The probe, especially the uterine contraction pressure probe, should be protected from moisture and placed on the probe holder after use.
5. After each day of use, turn off the power of the host. If the instrument is not used in a good environment, you must cover it with a cloth. Use a dry cloth or paper towel with a little alcohol to wipe the probe and buttons for disinfection. At the same time, please pay attention that the alcohol should not be too much so as not to get into the probe.
6. Pay attention to keeping the external surface of each part of the instrument clean, and regularly wipe it with a cloth dampened with cleaning solution. Be careful not to get the cleaning solution in the case. Dry it after cleaning to avoid condensation.
显示器显示屏上只能用干布擦拭。 7. Wipe the monitor display with a dry cloth only.
关机后的10分钟内不可以拆下来包装，搬运仪器。 8. Do not remove the packaging and carry the instrument within 10 minutes after shutdown.
长期不使用仪器的情况下，要拔掉电网电源插头;并将探头和按钮等部件放入附件盒内 。 9. If the instrument is not used for a long time, unplug the power cord of the power grid ; put the probe and buttons into the accessory box .
Related Products of Jiangsu Jinhu Dongxiang Meter: Flow Meter, Temperature Meter, Pressure Meter, Calibration Meter , Level Meter, etc.