⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
What you should pay attention to when using a pressure calibrator
2011-11-30 16:16:36

1. Although the instrument has an anti-seismic design, be very careful when handling it, and avoid falling and collision when using it;

2. Do not let other heating elements, such as electric soldering iron, be near the display screen to prevent scalding the plastic material;

3. The meter has sufficient overload capacity, but do not overload it severely, it will cause damage to the sensor and make the meter unusable;

; 4. The instrument should be placed in a dust-free and non-corrosive environment. If there are special requirements, please indicate the pressure calibrator in the contract;

5. When the meter is not in use, the power should be turned off. When it is not in use for a long time, it should be recharged every three months.

不能使用汽油,酒精等化学溶剂擦洗面板; 6. The pressure calibrator cannot scrub the panel with chemical solvents such as gasoline and alcohol;

7. The instrument sensor is a high-precision product, and the surface of the silicon diaphragm must not collide with a solid, otherwise the sensor will be damaged;

8, without professional testing skills and dedicated testing equipment, do not open the cover for maintenance, and do not allow adjustment of internal components,

And replace materials, otherwise the reliability of the instrument cannot be guaranteed;

Do not store instruments with high humidity, near high-temperature heat sources, strong vibration pressure calibrators, and corrosive gas storage instruments