是工业上最常用的温度检测元件之一。 Thermocouples are one of the most commonly used temperature sensing elements in the industry. Its advantages are:
1. Simple structure and easy to use; thermocouple is usually composed of two different metal wires, and it is not restricted by size and opening. It has a protective sleeve outside, which is very convenient to use;
2. High measurement accuracy; because the thermocouple is in direct contact with the measured object, it is not affected by the intermediate medium;
3. Wide measuring range, commonly used thermocouples can be continuously measured from -50 to + 1600 ° C, some special thermocouples can be measured as low as -269 ° C (such as gold-iron-nickel-chromium) and up to + 2800 ° C (such as tungsten -rhenium)……
：铠装热电阻是由感温元件(电阻体)引线、绝缘资料、不锈钢套管组合而成的坚实体。 Armored thermal resistance : Armored thermal resistance is a solid body composed of a combination of temperature sensing element (resistor) leads, insulation materials, and stainless steel sleeves. Has the following advantages:
No air gap inside
Small size, thermal inertia, small measurement lag, impact resistance
Long service life, close to the end face of the thermometer, compared with general axial thermal resistance
Good mechanical properties, vibration resistance, and easy installation
In order to ensure the reliable and stable operation of the thermocouple, the structural requirements of the thermocouple are as follows:
The connection between the compensation wire and the free end of the thermocouple should be convenient
The two hot electrodes should be well insulated from each other to prevent short circuit
The protective sleeve should ensure that the hot electrode is fully isolated from the harmful medium
The welding of the two hot electrodes that make up the thermocouple must be firm
Flameproof thermal resistance : Explosion-proof thermal resistance is exposed to the explosive mixed gas inside the casing through the junction box of the special structure.
The open circuit repair of the shadow resistor such as spark or arc must change the length of the resistance wire to affect the resistance value, and replace it with a new one.
The resistance body is good. If welding repair is used, it can only be used after verification after welding.