⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
Diaphragm pressure gauge has better tightness and can protect the internal mechanism from contamination.
2012-4-17 9:20:20

适用于测量具有一定腐蚀性、非凝固或非结晶的各种流体介质的压力或负压。 Diaphragm pressure gauges are suitable for measuring the pressure or negative pressure of various fluid media that are corrosive, non-solidified or non-crystalline. Corrosion resistance depends on the diaphragm material. The instrument is composed of a measuring system including a flange joint, a corrugated diaphragm, a transmission indicating mechanism including a connecting rod, a gear transmission mechanism, a pointer and a dial, and a housing including a watch case and a bezel. The meter housing is a splash-proof structure with good tightness, so it can protect its internal mechanism from contamination. The working principle of the meter is based on the elastic element measuring the diaphragm deformation on the system. Under the pressure of the measured medium, the diaphragm is forced to produce the corresponding elastic deformation --- displacement, and is amplified by the transmission of the connecting rod group through the transmission mechanism. The pointer fixed on the gear will gradually measure the measured value on the dial Instructed.

Main technical instructions of diaphragm pressure gauge
Accuracy level: 2.5
Working environment temperature: -40 ~ + 70 ℃; relative humidity is not more than 90%
Temperature influence: When the use temperature deviates from 20 ± 5 ℃, its temperature additional error is not more than 0.04% / ℃
Working position: vertical installation.
Enclosure protection class: IP64

与膜盒压力表相比较 Comparison of diaphragm pressure gauges and capsule pressure gauges

Capsule pressure gauge: The capsule is used as a sensitive element for measuring small pressure. It is used to measure the micro-pressure and negative pressure of non-corrosive effects on copper alloys and non-explosive dangerous gases. It is widely used in boiler ventilation, gas pipelines, combustion devices and other similar equipment. The stainless steel capsule pressure gauge is made of stainless steel according to the pressure guiding system and the housing. It is used to measure the micro-pressure and negative pressure of various gaseous media in the process with high corrosion resistance. The production of stainless steel capsule pressure gauges is based on the structural features of the original capsule pressure gauges and is a micro-pressure gauge with corrosion resistance. It is applied to equipment such as boiler ventilation and gas pipelines, and measures the micro pressure and negative pressure of various gas media in the process with high corrosion resistance requirements. Accuracy level: 2.5
Measuring range: (kPa): 0 to 4; 0 to 6; 0 to 10; 0 to 16; 0 to 25; 0 to 40; 0 to 60; -4 to 0; -6 to 0; -10 to 0; -16 to 0; -25 to 0; -40 to 0; -2 to 2; -3 to 3; -5 to 5; -8 to 8; -12 to 12; -20 to 20 -30 to 30
Environmental conditions: -25 ~ 55 ℃, relative humidity is not more than 80%
Resistance to working environment vibration: V · H · 3 class Weight: 0.5kg

The meter is composed of a measurement system (including joints, bellows boxes, etc.), transmission mechanism (including rod pull mechanism, gear transmission mechanism), indicating parts (including pointer and dial), and housing (including watch case, backing ring and watch glass). composition. The working principle of the meter is based on the corrugated membrane box under the pressure of the measured medium, the free end of the corresponding elastic deformation, and then transmitted by the gear transmission mechanism and amplified, the pointer fixed on the gear shaft will be measured one by one The value is indicated on the dial. There is also a zero-adjusting device, which can easily adjust the zero position.
The measurement range of the capsule pressure gauge is -80 ~ 60000Pa, but different capsule pressure gauges should be selected according to different pressure ranges. It is recommended to use a disc diaphragm pressure gauge when the pressure is -1000Pa ~ 60000Pa. If the pressure is -80Pa It is recommended to use a rectangular capsule pressure gauge. Working position and environment: The instrument is installed vertically; the working environment is -25 ~ 55 ℃; the relative humidity is not more than 80%; and the surrounding environment does not contain harmful gases that corrode the instrument.

:适用于测量具有一定腐蚀性、非凝固或非结晶的各种流体介质的压力或负压。 Diaphragm pressure gauge : suitable for measuring the pressure or negative pressure of a variety of corrosive, non-solidified or non-crystalline fluid media. The corrosion resistance depends on the diaphragm material. The instrument is composed of a measurement system (including flange joints, corrugated diaphragms), a transmission indicating mechanism (including a connecting rod, a gear transmission mechanism, a pointer and a dial), and a housing (including a watch case and a bezel). The meter housing is a splash-proof structure with good tightness, so it can protect its internal mechanism from contamination. The working principle of the meter is based on the deformation of the elastic element (the diaphragm on the measuring system). Under the pressure of the measured medium, the diaphragm is forced to produce the corresponding elastic deformation-displacement. The link group is driven by the transmission mechanism and amplified. The pointer fixed on the gear will gradually measure the measured value on the dial. Indicate it.
Main Specifications:
Accuracy level: 2.5
Working environment temperature: -40 ~ + 70 ℃; relative humidity is not more than 90%
Temperature influence: When the use temperature deviates from 20 ± 5 ℃, its temperature additional error is not more than 0.04% / ℃
Working position: Vertical installation enclosure Protection level: IP64
Advantages and disadvantages: advantages: 1. good overload performance; 2. linearity; 3. suitable for measuring absolute pressure and differential pressure; 4. small size, moderate price; 5. can be used for viscous, slurry measurement. Disadvantages: 1. Poor seismic and impact resistance; 2. Difficult to maintain; 3. Low measuring pressure.