由于具有磁性藕合隔离器密闭结构，尤其适用于易燃、易爆和腐蚀有毒液位检测。 Due to the closed structure of the magnetic coupling isolator, the magnetic flap level gauge is especially suitable for the detection of flammable, explosive and corrosive toxic liquid levels. Therefore, the level detection method of the original complicated environment becomes simple, reliable and safe. The level gauge has a direct-reading characteristic of local display. No need for multiple sets of level gauges. Has a single unit for full range measurement. The device has fewer holes, clear display, conspicuous signs, and intuitive reading. When the liquid level gauge is directly equipped with a display instrument, the intermediate transmission of the signal detection of the system can be omitted, thereby improving its transmission accuracy. Overview of magnetic level gauge The UZ series magnetic column level gauge is a product introduced by the company to absorb similar products from abroad and to improve its development and production. The basic UHZ magnetic float level gauge series products can achieve high sealing, leakage prevention and safe and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. There is no blind zone in the entire measurement process. With a large measurement range, it can be equipped with a liquid level alarm and control switch to realize the upper and lower limit alarm and control of the liquid level or the boundary level. When equipped with an LB liquid level transmitter, it can convert the liquid level and boundary level signals into Two-wire system 4 ～ 20mADC standard signal for long-distance detection, indication, recording and control. The series of products are widely used in liquid level measurement and control in the production process of power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, food and other industries.
安装磁翻板液位指示器安装在桶槽外侧或上面，用以指示和控制桶槽内的封形式可根据需要加装排污阀。 Magnetic flap liquid level gauge installation The magnetic flap liquid level indicator is installed on the outside or above of the tank, which is used to indicate and control the seal inside the tank. A drain valve can be installed as required. The connection flange can be a control instrument for customizing the liquid level height. The indicator consists of magnetic color chips. When the magnetic floating ball in the body tube rises with the liquid level, the color film is flipped to display the liquid level height. It is also possible to install magnetic technology '> switch or remote transmitter on the body tube to output switching signal or analog signal. It is suitable for high temperature, high pressure, corrosion resistance and other occasions. It can be displayed and controlled remotely. The body pipe is made of seamless steel pipe, and the connecting pipe is welded with pull holes, and there is no scratch inside. The installation method can be side or top, and the lower end of the body is sealed.
的选购:本产品又称磁性液位计,磁翻柱液位计,磁浮子液位计,它是利用磁藕合原理进行工作的,产品弥补了玻璃管液位计不能在高温高压下工作且易碎的多重缺点. 有侧装和顶装二种安装方式,无论那种方式都可以捆绑远传装置,使液位计即可以就地显示液位,又可以远程监控液位.捆绑后的磁翻板液位计可称为远传型磁翻板液位计. 制作磁翻板液位计的工艺虽然很简单,但磁翻板液位计作为计量仪表,特别是远传型磁翻板液位计，如果未经质监局审核,没有生产许可证,产品质量是难以得到保证的.因此,采购磁翻板液位计要选择有生产许可证且信誉好的厂家,价格可能略高一点,但产品质量有保证,售后服务有保证。 Purchase of magnetic flap level meter : This product is also called magnetic level gauge, magnetic flip column level gauge, magnetic float level gauge.It works by the principle of magnetic coupling, and the product makes up for the liquid level of glass tube. The gauge can not work under high temperature and pressure and is fragile. There are two installation methods, side mounting and top mounting. No matter which way, the remote transmission device can be bundled, so that the level gauge can display the liquid level on the spot and can Remote monitoring of liquid level. The bundled magnetic flap level gauge can be called a remote transmission magnetic flap level gauge. Although the process of making a magnetic flap level gauge is simple, the magnetic flap level gauge is used as a measuring instrument In particular, the remote transmission type magnetic flap level gauge is difficult to guarantee product quality if it has not been audited by the Quality Supervision Bureau and without a production license. Therefore, when purchasing a magnetic flap level gauge, it is necessary to choose a production license and Reputable manufacturers, the price may be slightly higher, but product quality is guaranteed, after-sales service is guaranteed. The use of magnetic level gauge The glass plate level gauge can be directly used to observe the liquid level height of various media in the container. It is suitable for liquid level indication in the petroleum, chemical and other industrial fields. The liquid level gauge has a simple structure, intuitive and clear observation, no clogging and leakage, convenient installation and simple maintenance. The upper and lower mounting flanges of the glass plate level gauge are connected to the container to form a connector. The actual height of the liquid level in the container can be directly observed through the glass plate. The upper and lower valves are equipped with safety steel balls. When the glass is accidentally damaged, the steel balls are automatically sealed under the pressure of the container to prevent the liquid in the container from overflowing and ensure the safety of the operator. The column-mounted side-mounted magnetic level gauge and magnetic float-type level gauge are installed on the extension tube on the outside of the barrel tank. The liquid level inside the barrel tank can be clearly known by the flap indicator. A magnetic switch can also be installed on the outside of the bypass pipe as an electrical contact signal output, or the device's liquid level transmitter can perform long-range liquid level signal transmission and liquid level control. The level gauge is a reliable safety instrument. Due to the closed structure of the magnetic coupling isolator. Especially suitable for flammable, explosive and corrosive toxic liquid level detection. Therefore, the level detection method of the original complicated environment becomes simple, reliable and safe. The level gauge has a direct-reading characteristic of local display. No need for multiple sets of level gauges. Has a single unit for full range measurement. The device has fewer holes, clear display, conspicuous signs, and intuitive reading. When the liquid level gauge is directly equipped with a display instrument, the intermediate transmission of the signal detection of the system can be omitted, thereby improving its transmission accuracy. Factors that should be considered when selecting a magnetic level meter The following factors should be considered when selecting a liquid level timer: (1) the measurement object, such as the physical and chemical properties of the measured medium, and the working pressure and temperature, installation conditions, and the speed of the liquid level change; (2) Measurement and control requirements, such as measurement range, measurement (or control) accuracy, display mode, on-site instructions, long-distance instructions, interface with a computer, safety and corrosion prevention, reliability and ease of construction.