⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
The failure and solution of diaphragm pressure gauge
2011-12-10 9:11:28

是一种特殊形式的截断阀,最突出特点是隔膜把下部阀体内腔与上部阀盖内腔隔开,使位于隔膜上方的阀杆、阀瓣等零件不受介质腐蚀,省去了填料密封结构,且不会产生介质外漏。 Diaphragm valve is a special form of cut-off valve. The most prominent feature is that the diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper bonnet. Packing sealed structure, no leakage of medium. But sometimes

Some common faults still occur.


Solution

First: Reasons for inflexible handwheel operation are valve stem bending and thread damage


The solution is to replace the valve stem, trim the threads, and add lubricant

不能自动启闭的原因有橡胶隔膜损坏、气源压力过低、弹簧顶紧力过大 Second: The reasons that the pneumatic diaphragm valve cannot open and close automatically include the damaged rubber diaphragm, the air source pressure is too low, and the spring pressing force is too large.

The solution is to replace the diaphragm, increase the air supply pressure, and reduce the spring tension.

Third: The leakage at the connection between the valve body and the bonnet is caused by the rupture of the rubber layer in the valve body and the connection bolts being loose.

The solution is to replace the valve body and tighten the connecting bolts.


的常见故障 Common faults of diaphragm valves

1. Replace valve body 2. Handwheel operation is not flexible 3. Leakage at valve body and valve cover connection