指示器安装在桶槽外侧或上面，用以指示和控制桶槽内的封形式可根据需要加装排污阀。 The magnetic flap liquid level indicator is installed outside or above the bucket tank, which is used to indicate and control the seal form in the bucket tank. A drain valve can be added as required. The connection flange can be a control instrument for customizing the liquid level height. The indicator consists of magnetic color chips. When the magnetic floating ball in the body tube rises with the liquid level, the color film is flipped to display the liquid level height. It is also possible to install a magnetic switch or remote transmitter on the body tube to output a switch signal or an analog signal. It is suitable for high temperature, high pressure, corrosion resistance and other occasions. It can be displayed and controlled remotely. The body pipe is made of seamless steel pipe, and the connecting pipe is welded with pull holes, and there is no scratch inside. The installation method can be side or top, and the lower end of the body is sealed.
的主要特点１、密封性强，不易渗透，采用特殊接口处理，更适合液氨等高渗透场合使用２、耐高温、高压能力强，最大温度可大600℃,最大压力可达25MPa３、耐腐蚀能力，采用最新不锈钢内衬PTFE工艺,使产品防腐能力超强４、可在低温场合使用，采用特殊夹套工艺，零下200度场合也能应付自如５、信号远传能力强，信号输出可为开关量、模拟量，可带HART协议 The main characteristics of the magnetic flap liquid level gauge 1. Strong sealing, not easy to penetrate, special interface treatment, more suitable for liquid ammonia and other high-permeability occasions 2. High temperature and high pressure capability, the maximum temperature can be greater than 600 ℃, the maximum pressure Up to 25MPa3. Corrosion resistance, using the latest stainless steel lined PTFE technology, which makes the product extremely resistant to corrosion. 4. It can be used in low-temperature occasions. Using special jacket technology, it can also handle freely at minus 200 degrees. 5. Signal remote transmission capability. Strong, signal output can be switch value, analog value, and can carry HART protocol
With the change of market demand, the company's products are also constantly upgrading the quality technology and improving the production process, broadening the application field and scope of the level gauge. 已走向国际化的水平。 The magnetic flap level gauge produced by our company has reached the international level. In addition, the output signal of this level gauge is various, which can realize long-distance level indication, detection, control and recording. The magnetic flap liquid level gauge can be applied to almost all kinds of industrial automation process control level measurement and control. Magnetic flap level gauges can be widely used in liquid level measurement, control and monitoring in the fields of petroleum processing, food processing, chemical industry, water treatment, pharmaceuticals, electric power, papermaking, metallurgy, ships and boilers.