有热电偶校验仿真仪，热电阻校验仿真仪，过程信号仿真仪，手持式多功能校验仿真仪等等，它们是功能强大和容易使用的现场校准器。 Calibration simulators include thermocouple calibration simulators, thermal resistance calibration simulators, process signal simulators, handheld multi-function calibration simulators, etc. They are powerful and easy-to-use field calibrators. Measurement and simulation output functions can test and calibrate almost any process parameter except pressure. The serialized design of the calibration simulator makes the operation very simple. When calibrating, troubleshooting or repairing, verifying the simulator will help you.
＊ 手持式多功能校验仿真仪小巧,变于携带和手持,是热工仪表行业人员在现场检修,调试的极佳配置. Handheld multi-function calibration simulator * The hand-held multi-function calibration simulator is small, portable and hand-held.
＊ The perfect combination of full Chinese blue screen display interface and intelligent operating system makes the instrument more humane.
＊ Complete functions, 18 kinds of input, output synchronous operation, independent operation, power isolation, without affecting each other.
＊ There are V, mV, mA, Ω and thermocouple (TC), thermal resistance (RTD) signal output and measurement. 24VDC power output provides loop power for the transmitter, and can measure the mA output by the transmitter value.
＊ With frequency (Hz) measurement and simulation function.
＊ Fully digital operation, intelligent menu prompts; more intuitive and simple, so that users are comfortable.
＊ Directly input the thermocouple (thermal resistance) ° C value, display and output the corresponding mV (? Ω) value, no need to check the index table.
＊ When measuring thermocouple (thermal resistance) signal, ℃, mV, Ω are displayed at the same time.
＊ High precision temperature sensor is used to provide cold junction compensation for thermocouple.
＊ All signals can be fine-tuned or continuously increased or decreased in any number of digits.
＊ With analog transmitter function, it can verify 4 ~ 20mA loop current of DCS channel.
＊ Any number of high-precision digital pressure modules can be selected as required to achieve accurate pressure measurement. See Table 5 for pressure module selection.
Equipped with RS232 communication interface, the instrument can quickly correct the out-of-tolerance of the instrument.
* AC and DC dual-use, built-in high-performance large-capacity imported rechargeable lithium battery, which can work continuously for more than 8 hours on a single charge, depending on the working status of the instrument.
的参数★测量、仿真直流电流和直流电压，可输出0-5V DC，0-20mA DC，可测量0-10V DC，0-20mA DC。 Process signal verification simulator parameters ★ Measure and simulate DC current and DC voltage, can output 0-5V DC, 0-20mA DC, can measure 0-10V DC, 0-20mA DC.
★ Simple and easy operation, wide application range.
★ Complete functions, high measurement and simulation accuracy.
★ DC24V constant voltage source can directly adjust the two-wire transmitter.
★ 20% manual stepping and fixed-point simulation capability for fast linear detection.
★ Optional fast and slow ramp step function, providing continuous smooth output to test the main technical indicators of the loop and valve sliding process signal verification simulator Voltage simulation: 0 ～ 5V DC Voltage measurement: 0-10V DC
Current simulation: 0-20mA DC Current measurement: ± 20mA
24V loop voltage output, load 30mA