⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
Electric welding machine cable operation
2012-1-29 10:17:59

YH electric welding machine cable


是在低电压(最高电压为200V)大电流的条件下工作,要求具有一定的耐热性。 YH electric welding machine cable (1) The electric welding machine cable is operated under the condition of low voltage (maximum voltage of 200V) and large current, and requires certain heat resistance. (2) The long-term allowable working temperature of the cable should not exceed 65 ° C.


YH electric welding machine cable

Product standard: GB5013.6-1997 Q / 12YJ3153-2000

Product use: This product is suitable for the secondary side wiring and welding tongs for electric welding machines with a secondary-side voltage of 200V AC and pulsating DC peak 400V.

Operating characteristics: The long-term allowable operating temperature of 2451EC81 (YH), 2451EC82 (YHF) cable conductors should not exceed 65 ° C. The long-term allowable working temperature of YH 85 ℃ type cable conductor does not exceed 85 ℃.

YHF type has certain oil resistance and non-flame retarding characteristics.

The long-term allowable working temperature of EH cable conductors does not exceed 70 ° C. It has good abrasion resistance and also has certain oil resistance.

是适用于电焊机二次侧接线及连接电焊钳的专用电缆,额定电压交流不超过200V和脉动直流峰值400V。 Overview: Welding machine cable is a special cable suitable for welding the secondary side of welding machines and connecting welding tongs. The rated voltage AC does not exceed 200V and the pulsating DC peak 400V. The structure is a single wire core, which is made of multiple strands of flexible conductors.

The outer surface of the conductive wire core is wrapped with a heat-resistant polyester film insulation tape, and the outermost layer is made of an insulating and sheath made of rubber as a protective layer.

Requirements:

(1) The electric welding machine cable works under the condition of low voltage (maximum voltage of 200V) and large current, and it is required to have a certain heat resistance.

(2) The long-term allowable working temperature of the cable should not exceed 65 ° C.

(3) The cable is frequently moved, twisted and cast, requiring softness and good bending performance. (4) It is easy to be scratched and rubbed by sharp iron and steel components during casting, so it is required that the cable has good mechanical properties such as tear resistance and abrasion resistance.

(5) The use of environmental conditions is complex, such as sunlight, boiling water, contact with muddy water, engine oil, acid and alkali liquids, etc., which require certain weather resistance, oil resistance, and solvent resistance. (6) Hot welding parts are sometimes encountered, which requires good heat distortion resistance.

(7) Frequent movement requires small outer diameter and light weight.

Because the electrical performance of this kind of cable is not high, and the use of environmental conditions is complex, it is unsuitable to meet various complex environmental factors in the structure. When using, pay attention to improving the use conditions to prevent external damage to the YH electric welding machine cable


YH electric welding machine cable use requirements:


(1) The YH cable works under the condition of low voltage (maximum voltage of 200V) and large current, and requires certain resistance.

(2) The long-term allowable working temperature of the welding wire and cable should not exceed 65 ℃.


(3) The lead wires of the motor are frequently moved, twisted and cast, requiring softness and good bending performance.


(4) It is easy to be scratched and rubbed by sharp iron and steel components during casting, so it is required that the cable has good mechanical properties such as tear resistance and abrasion resistance.


(5) The use of environmental conditions is complex, such as sunlight, boiling water, contact with muddy water, engine oil, acid and alkali liquids, etc., which require certain weather resistance, oil resistance, and solvent resistance.


(6) Hot welding parts are sometimes encountered, which requires good heat distortion resistance.


(7) Frequent movement requires small outer diameter and light weight. Because the electrical performance of this kind of cable is not high, and the use of environmental conditions is complex, it is unsuitable to meet various complex environmental factors in the structure. Pay attention to improve the use of the bar

To prevent foreign damage.

Features of electric welding machine cable:


1. Particularly soft and has good bending performance


2. The sheath material adopts natural rubber or neoprene mixture, which can be applied to different occasions.


3. Neoprene jacket has heat resistance, oil resistance and non-flammability.

4. The maximum working temperature of the cable is 65 ℃


Electric welding machine cable use requirements:


1. The YH cable works under the condition of low voltage (maximum voltage of 200V) and large current, and requires certain tolerance.


2. The long-term allowable working temperature of the handlebar cable should not exceed 65 ℃.


3. The motor lead wire is frequently moved, twisted and cast, requiring softness and good bending performance.

4. It is easy to be scratched and rubbed by sharp iron and steel components during casting, so it is required that the cable has good mechanical properties such as tear resistance and abrasion resistance.

5, the use of environmental conditions is complex, such as sunlight, water boiling, contact with mud water, motor oil, acid and alkali liquids, etc., require a certain degree of weather resistance and oil and solvent resistance.


6, sometimes encountered hot welding parts, requiring good heat distortion resistance.


7. Frequent movement requires small outer diameter and light weight. Because the electrical performance of this kind of cable is not high, and the use of environmental conditions is complex, it is unsuitable to meet various complex environmental factors in the structure. Pay attention to improve the use

Conditions to prevent foreign damage.

use:


是适用于电焊机二次侧接线及连接电焊钳的专用电缆,额定电压交流部超过200V和脉动直流峰值400V。 Electric welding machine cable of Jiangsu Jinhu Dongxiang Instrument Factory is a special cable suitable for the welding of secondary side of electric welding machine and connection of welding tongs. The structure is a single wire core. Twisted with multiple flexible wires.

The outside of the conductive wire core is wrapped with a heat-resistant polyester film insulation tape. The outermost layer is made of rubber insulation and sheath as a protective layer


Requirements:
(1) The YH cable works under the condition of low voltage (maximum voltage of 200V) and large current, and requires certain resistance.


(2) The long-term allowable working temperature of the welding wire and cable should not exceed 65 ℃.


(3) The lead wires of the motor are frequently moved, twisted and cast, requiring softness and good bending performance.


(4) It is easy to be scratched and rubbed by sharp iron and steel components during casting, so it is required that the cable has good mechanical properties such as tear resistance and abrasion resistance.


(5) The use of environmental conditions is complex, such as sunlight, boiling water, contact with muddy water, engine oil, acid and alkali liquids, etc., which require certain weather resistance, oil resistance, and solvent resistance.


(6) Hot welding parts are sometimes encountered, which requires good heat distortion resistance.


(7) Frequent movement requires small outer diameter and light weight. Because the electrical performance of this kind of cable is not high, and the use of environmental conditions is complex, it is unsuitable to meet various complex environmental factors in the structure. Pay attention to improve the use

Conditions to prevent outside damage to YH / YHF cables, YH / YHF electric welding machine cables

Main technical parameters


Table 6—9—14 Electric Welder Cable Models


Model Name


YH Natural Rubber Sheathed Welder Cable


YHF neoprene or other equivalent synthetic rubber elastomer sheathed welding machine cable

Requirements:


(1) The YH cable works under the condition of low voltage (maximum voltage of 200V) and large current, and requires certain resistance.


(2) The long-term allowable working temperature of the welding wire and cable should not exceed 65 ℃.


(3) The lead wires of the motor are frequently moved, twisted and cast, requiring softness and good bending performance.


(4) It is easy to be scratched and rubbed by sharp iron and steel components during casting, so it is required that the cable has good mechanical properties such as tear resistance and abrasion resistance.


(5) The use of environmental conditions is complex, such as sunlight, boiling water, contact with muddy water, engine oil, acid and alkali liquids, etc., which require certain weather resistance, oil resistance, and solvent resistance.

(6) Hot welding parts are sometimes encountered, which requires good heat distortion resistance.


(7) Frequent movement requires small outer diameter and light weight. Because the electrical performance of this kind of cable is not high, and the use of environmental conditions is complex, it is unsuitable to meet various complex environmental factors in the structure. Pay attention to improve the use of the bar

To prevent foreign damage