⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
Electromagnetic Flowmeter
2011-6-11 8:57:58

The electromagnetic flowmeter is a meter for measuring conductive liquids made according to the law of Faraday's electromagnetic induction.

The electromagnetic flowmeter has a series of excellent characteristics, which can solve the problems that other flowmeters are not easy to apply, such as the measurement of dirty and corrosive flows.

In the 1970s and 1980s, the electromagnetic flowmeter had a major breakthrough in technology, making it a widely used type of flowmeter , and its percentage of use in flow meters has been rising.

advantage:

(1) The measuring channel is a smooth straight tube, which will not block, and is suitable for measuring liquid-solid two-phase fluids containing solid particles , such as pulp , mud , sewage, etc .:

(2) No pressure loss caused by flow detection, good energy saving effect:

(3) The measured volume flow is actually not significantly affected by changes in fluid density, viscosity , temperature, pressure, and conductivity :

(4) Large flow range and wide caliber range:

(5) Corrosive fluids can be used.

Disadvantages:

(1) Cannot measure liquids with very low conductivity, such as petroleum products;

(2) Cannot measure gas, steam and liquid containing large bubbles;

(3) Cannot be used at higher temperatures.

Application Overview:

The electromagnetic flowmeter has a wide range of applications, and large-caliber meters are mostly used in water supply and drainage projects; small- and medium-calibers are often used in high-demand or difficult-to-measure applications, such as cooling water control in the blast furnace tuyere of the steel industry, measuring pulp and black liquor in the paper industry, Strong corrosive solution, non-ferrous metallurgy industry slurry; small and small calibers are often used in places with health requirements such as the pharmaceutical industry, food industry, and biochemistry.

Technical Parameters:

Instrument accuracy: pipeline 0.5, 1.0; plug-in 2.5

Measurement medium: Various liquid and liquid-solid two-phase fluids with conductivity greater than 5 μS / cm.

Velocity range: 0.2 ~ 8m / s

Working pressure: 1.6MPa

Ambient temperature: -40 ℃ ~ + 50 ℃

Medium temperature: Teflon lining≤180 ℃

Rubber lining≤65 ℃

Explosion-proof mark: ExmibdⅡBT4

Explosion-proof certificate number: GYB01349

External magnetic interference: ≤400A / m

Housing protection: integrated type: IP65;

Separate type: Sensor IP68 (5 meters underwater, rubber lining only)

Converter IP65

Output signal: 4 ~ 20mA.DC, load resistance 0 ~ 750Ω

Communication output: RS485 or CAN bus

Electrical connection: M20 × 1.5 internal thread, φ10 cable hole

Power supply voltage: 90 ~ 220V. AC, 24 ± 10% V.DC

Maximum power consumption: ≤10VA

Jinhu Dongxiang Instrument Co., Ltd. electromagnetic flowmeter related products: split electromagnetic flowmeter , explosion-proof electromagnetic flowmeter , intelligent anticorrosive electromagnetic flowmeter , plug-in electromagnetic flowmeter