⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
Installation of Dust Collector Level Meter
2011-10-18 17:33:55

料位测量成为 不可避免的 难题 In the dusthouse with harsh environment , material level measurement becomes an inevitable problem . In order to measure accurately, we have eliminated the cause and designed the installation method of the material level meter of the dust removal bin :

     除尘仓料位的测量 ,原来 是采用侧面安装的方式, 这种方式当 除尘仓料位测量仪 插入深度超过一米 的时候, 仓内堆积的粉料 将插入的探杆压弯 ;这就需要 在设计生产除尘仓时 ,防止 除尘仓不变形以及筛选大颗立 ,调整 除尘仓的内部结构。 First, the measurement of the dust level in the dust removal bin was originally installed on the side. In this way, when the depth of the dust removal bin level measuring instrument is inserted more than one meter , the accumulated powder in the bin will bend the inserted probe ; This requires that when designing and producing the dust-removal bin , prevent the dust-removal bin from deforming and screen large particles, and adjust the internal structure of the dust-removal bin.

     粉尘颗粒都比较细小 形成 仓内的内部挂料 ,我们可以设计 在仓内焊上槽钢或筛网。 Second, in order to reduce that the dust particles are relatively small and form the internal hanging material in the dust bin , we can design the channel steel or screen welded in the bin. 可以 利用 这种设计回避挂料层, 精确地把仓内物料测量出来 The dust level meter can use this design to avoid the hanging layer and accurately measure the materials in the bin :

     除尘仓料位仪 底座焊上在槽钢的中间, 再把 测量探 垂直安装底座装上 First, the base of the dust level meter is welded to the middle of the channel steel, and then the measuring probe is mounted vertically on the base ;

     把信号沿槽钢下部 底座处引出, 从而达到 回避挂料层并能精确连续地将除尘仓 测量出来的目的; Then, we can lead the signal from the base along the lower part of the channel steel , so as to avoid the hanging layer and accurately and continuously measure the dust removal bin ;

     使仓内粉料挂料 产生的,还来自于 生产工艺带来的结露。 Third, the powder produced in the warehouse also comes from the condensation caused by the production process.

     除尘仓内部结构特点,结合 公司 生产料位 的多年 经验, 开发 除尘仓料位仪。 Jinhu Dongxiang Instrument Co., Ltd. has developed a dust collector level meter based on the internal structural characteristics of the dust collector and combined with the company 's many years of experience in production level. 料仓内挂料淹没探头 的情况,且能保证 把料位准确地测出 并具有抗摩擦 抗固料冲击 抗腐蚀 抗高温等 性能 ,因此完全能够长年在除尘仓中使用 ,并能精确连续的 测量 It avoids the situation of hanging the material and flooding the probe in the silo , and can ensure the accurate measurement of the material level . It can be used for accurate continuous measurement .