⎝⎛星力捕鱼⎞⎠

⎝⎛星力捕鱼⎞⎠ page Company Profile ⎝⎛星力捕鱼⎞⎠ Product center Quality system marketing network After sales service Recruitment contact us
Flow meter series
Temperature instrument series
Pressure instrument series
Calibration instrument series
Level instrument series
Digital display instrument series
Transmitter instrument series
Wire and cable series
Bridge instrument cabinet series
Pipe fitting valve series

Address: Xiongyi, Jinhe Road, Jinhu County, Jiangsu Province
Lunan
Phone: 0517-86900901
0517-86900921
0517-86900920
Fax: 0517-86900902
Postcode: 211600
http://zzyfwh.com
Email: chinadongxiang@163.com
Industry Information
Bimetal thermometer should avoid collision protection tube as much as possible during installation, use and transportation.
2012-4-7 9:07:58

是一种适合测量中、低温的现场检测仪表,可用来直接测量气体、液体和蒸汽的温度、该温度计从设计原理及结构上具有防水、防腐蚀、耐震动、直观、易读数、无汞害、坚固耐用等特点。 WSS series bimetal thermometer is a kind of on-site detection instrument suitable for measuring medium and low temperature. It can be used to directly measure the temperature of gas, liquid and steam. The thermometer is waterproof, corrosion-resistant, vibration-resistant, intuitive and easy to design. Reading, mercury-free, rugged and so on. It can replace other geotechnical temperature measuring instruments and is widely used in petroleum and chemical industry, machinery, shipbuilding, power generation, textile, printing and dyeing industries and scientific research departments.

The bimetal thermometer features no mercury damage during use and maintenance, easy to read, and rugged. The protective tube is 1Gr18Ni9Ti stainless steel and titanium molybdenum, which has strong pressure and corrosion resistance. Pull-type thermometer can be maintained or replaced for a short time without stopping the machine. Axial type, radial type, 135? Type, universal type and other varieties are complete, suitable for various site installation needs. 1. During the storage, installation, use and transportation of WSS series bimetal thermometers, try to avoid collision with the protection tube, and do not bend or deform the protection tube. During installation, it is strictly forbidden to twist the meter case. 2. The meter should work normally in the ambient temperature of -30 ℃ ~ 80 ℃. 3. The temperature at which the meter often works is preferably between 1/2 and 3/4 of the scale range.


执行标准 Bimetal thermometer implementation standard
JB / T8803-1998 GB3836-83
Other parameters Nominal diameter of the dial: 60 100 150
Accuracy grade: (1.0), 1.5
Thermal response time: ≤40S
Protection level: IP55
Angle adjustment error: The angle adjustment error should not exceed 1.0% of its range
Hysteresis: Hysteresis should not be greater than the absolute value of the basic error limit Repeatability: Repeatability limit range should not be greater than 1/2 of the absolute value of the basic error limit

是一种测量中低温度的现场检测仪表。 WSS series bimetal thermometer is a kind of on-site detection instrument for measuring low and medium temperature. It can directly measure the temperature of liquid vapor and gas medium in the range of -80 ℃-+ 500 ℃ in various production processes. The temperature is displayed on-site, which is intuitive, convenient, safe and reliable, and has a long service life. The core-pull thermometer can be maintained or replaced for a short time without stopping the machine. Axial type, radial type, 135o type, universal type and other varieties are complete, suitable for various site installation needs. WSSX stands for electric contact bimetal thermometer. The electric contact bimetal thermometer is based on a bimetal sheet wound in a loop shape. When one end is heated and expanded, the pointer is driven to rotate, and the working instrument displays the corresponding temperature value, and prevents environmental vibration. The bimetal thermometer is filled with silicone oil or the display part of the bimetal thermometer is separated from the measurement part to achieve the effect of shock resistance. The electric contact bimetal thermometer uses the change of temperature to drive the change of the contact. When it is disconnected with the upper or lower limit contact, the relay in the circuit is activated, so as to automatically control and alarm.